Product Manual
1. Install back clip, tripod stands,3dB or 5dB antenna.
2. Choose the operation mode-TX or RX, turn them on
3. Connect the transmitter to audio source (iPhone, TV, AV etc.) with a 3.5mm /RCA audio cable
4. Adjust the transmitter and receivers on the same channel
5. Put receivers on appropriate locations within work range (up to 1000ft in open area)
6. Connect receivers to music devices, such as power speaker, amplifier, headphones.
4
2.2 Wireless Audio Transmitter and Receiver for Speakers/Subwoofer
Speakers/Subwoofers are often the largest component in any music system or home theater system, so
eliminate cable clutter and expand speaker’s placement is a challenge. This system is designed to reduces
speaker cable clutter without sacrificing performance, and extend the wireless distance coverage.
CH1
Receiver 1
Receiver 2
Receiver 3
Local
Monitor
Out In
Mic
Out
In
Mic
CH2
Mixer Outputs (Auxiliary/Monitor)
1
2
3
4
5
6
7
8
AV Receiver
Out
Out
Subwoofer
RCA
OUT
AUX
OUT
1
2
3
6
3. Local monitor
Each transmitter has an auxiliary output to monitor the mixed signal, this local signal is identical to the signal send
to bodypack receivers
4. Pair up
Tune the receiver to the same channel with the transmitter, wireless signal will be sent to the performer.
5. Unlimited receivers
Expanded this system by using additional bodypack receivers tuned to the same transmitter.
6. Personalize mixing
Each bodypack receiver has auxiliary stereo audio input and mic input, it can add different signals input to get
personalize mixing.
7. Audio output
Connect receivers to earphones, headphones, speakers or other music players.
8. Independent volume adjustment
Adjust output audio volume of each bodypack receiver.
3.5mm audio cable
3.5mm to RCA audio cable
3.5mm to 6.35mm audio connector
The in-ear monitoring system market was holistically boosted by the growing demand for concerts and music
recordings, increasing live music shows and activities. More concerts and music festivals are using new technology in
place of traditional wired ones.
This system is based on 2.4GHz technology, a practical wireless solution to provide consist sound whenever you go
on stage while enhancing sound performances and freedom of movement. High-quality audio and stable transmission
make it perfect for professional studio and live stage performance!
1. Create monitor mixes
Mic and stereo audio can be sent to the bodypack transmitter and mixed.
2. Multiple systems
When several performers in different groups, transmitters should be on different frequency to send different mixes.
Performers tune each bodypack receivers to the frequency for their group.
2.1 Wireless In Ear Monitoring System
5
6
5
6
Transceiver
Charging cable
Antenna
Earphone
Tripod stand
Back clip
Packing List:
3.5mm audio cable
3.5mm to RCA audio cable
Transceiver
Charging cable
Antenna
Tripod stand
Back clip
Packing List:
In
Mic
Mic
In