Specifications

Danish Interpretation Systems Technical Specifications
Printed in Denmark
26
VOTING_CONTROL_MU (=52):
Command Item value Comment
VOTING_CONTROL_TYPE_OF_VOTING
1 3-Button or 5-Button voting.
VOTING_CONTROL_SECET_VOTING
3 Open or Secret voting.
VOTING_CONTROL_START_ATTENDANCE_CHECK
11 Start an attendance check
VOTING_CONTROL_STOP_ATTENDANCE_CHECK
12 Stop an attendance check
VOTING_CONTROL_REQUEST_ATTENDANCE_RESULT
14 Request the CU to deliver the
results of the most recent
attendance check.
VOTING_CONTROL_OPEN_VOTING
16 Open (=start) a voting session.
VOTING_CONTROL_CLOSE_VOTING
18 Close (=end) a voting session.
VOTING_CONTROL_REQUEST_VOTING_DETAILS
21 Request the CU to deliver the
results of the most recent voting
session.
4.5 Messages from the CU to the external unit
When the binary service interface is in the microphone control mode the CU sends messages in the
following message groups to the external controller:
• The MAIN_GRP group with messages regarding the connection and disconnection of
microphone units. The value corresponding to this group is 0.
• The EXTERNAL_AUDIO_STATUS_MU_GRP group consisting of status messages about the
settings of the amplifiers in the system. The value corresponding to this group is 29.
• The MICROPHONE_STATUS_GRP group that contains messages about the status of the
microphone application. The value corresponding to this group is 23.
• The EXTERNAL_CONTROL_GRP group used in the registering and monitoring of external
control units. The value corresponding to this group is 27.
• The VOTING_STATUS_GRP group that informs about attendance check and voting sessions.
The value corresponding to this group is 53.
• The UNIT_ATTENDANCE_CHECK_GRP group informs about microphone unit addresses of
delegates, who has pressed the ‘Present’ button. The value corresponding to this group is 58.
• The UNIT_VOTE_STATUS_GRP group used by the CU to inform about votes and unit address
from votes cast from microphone units. The value corresponding to this group is 69.