User's Manual

TianXuan M Series Handheld Thermal Camera User Manual

V1.0.0

4.5 Measurement Mode

In the observation interface, press OK shortly to enter the main menu, and select

"Measurement Settings" with the navigation button. Press OK again to enter the

secondary menu, select different measurement modes by shifting left or right on

the navigation button, and press OK to save your option.

In the observation interface, click anywhere on the screen to enter the main menu.

Then click "Measurement Settings" to select the desired measurement mode, and

make it effective by clicking the screen area.

4.6 Measurement Parameters

In the observation interface, press OK to enter the main menu, use the navigation

button to select the "parameter setting", then press OK again to enter the

secondary menu. Select different temperature measurement parameters by

shifting left or right, and press the enter button to parameterize. After setting,

press OK again to save your option.

In the observation interface, click anywhere on the screen to enter the main menu.

Click "Parameter Setting" to set the parameter. After finishing the setting, click

the screen area to take effect.

⚫ Emissivity: in order to obtain more accurate measurement results, you

need to set the emissivity according to the target to be measured before each

measurement, instead of using the default configuration. Emissivity refers to the

ratio of the radiant ability of an object to the radiant ability of a blackbody at the

same temperature, which is relative to the reflectivity of the object. The lower the

emissivity, the higher the proportion of energy being reflected. The higher the

emissivity, the lower the proportion of energy being reflected. For example, the

emissivity of human skin is 0.98, and the emissivity of printed circuit boards is

0.91. For more information on emissivity, you can refer to the quick start guide

in the package or inquire from other sources.