Specification
www.liquidynamics.com
7
PumPsPNEUmATIC PUmPS
PNEUMATIC OIL PUMPS
Part Number (w/o Bung Adapter) 21100T 21073T 21094T 21200 21300 21400 21500
Part Number (w/ Bung Adapter) 21100T-S2 21073T-S2 21094T-S2 21200-S1 21300-S1 21400-S2 21500-S2
Ratio 5:1 5:1 5:1 5:1 5:1 8:1 13:1
Flow Rate @ 90 PSI (GPM) 5 5 5 8 11 5.5 4.0
Maximum Air Pressure (PSI) 120 120 120 120 120 120 120
Air Inlet Size 1/4˝ NPT 1/4˝ NPT 1/4˝ NPT 3/8˝ NPT 3/8˝ NPT 3/8˝ NPT 3/8˝ NPT
Fluid Inlet Size 1˝ NPTF 1˝ NPTF 1˝ NPTF 1½˝ NPTF 1½˝ NPTF 1˝ NPTF 1˝ NPTF
Fluid Outlet Size 1/2˝ NPTF 1/2˝ NPTF 1/2˝ NPTF 3/4˝ NPTF 3/4˝ NPTF 3/4˝ NPTF 3/4˝ NPTF
Noise 79 db 79 db 79 db 79 db 79 db 79 db 79 db
Air Consumption (cfm) 12 12 12 18 21 21 22
Suction Tube Diameter 1.65˝ 1.65˝ 1.65˝ 2˝ 2˝ 2˝ 2˝
Suction Tube Length 11˝ 29˝ 37˝ 15˝ 17˝ 11˝ 11˝
Fits Drum Sizes (Gal.) Universal 16/30 55 Universal Universal Universal Universal
Shipping Weight, lbs. 12 14 16 19 21 22 24
NOTE: For longer pump life and eciency, we recommend the use of dried air or an air lter. As with any pneumatic
equipment, you can expect longer trouble free operation with the use of clean, dry air. The use of an air drier, separator, or
minimally an air lter, is advantageous. See page 55 for our selection of air regulators, separators (lter) and dryers.