SDS

13. Disposal considerations
Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Contents
under pressure. Do not puncture, incinerate or crush. Do not allow this material to drain into
sewers/water supplies. Do not contaminate ponds, waterways or ditches with chemical or used
container. Dispose of contents/container in accordance with local/regional/national/international
regulations.
Disposal instructions
Dispose in accordance with all applicable regulations.
Local disposal regulations
The waste code should be assigned in discussion between the user, the producer and the waste
disposal company.
Hazardous waste code
Dispose of in accordance with local regulations. Empty containers or liners may retain some
product residues. This material and its container must be disposed of in a safe manner (see:
Disposal instructions).
Waste from residues / unused
products
Since emptied containers may retain product residue, follow label warnings even after container is
emptied. Empty containers should be taken to an approved waste handling site for recycling or
disposal. Do not re-use empty containers.
Contaminated packaging
14. Transport information
DOT
Not available.
UN number
Consumer Commodity
UN proper shipping name
ORM-D
Class
Transport hazard class(es)
-
Subsidiary risk
Not applicable.
Packing group
Read safety instructions, SDS and emergency procedures before handling.
Special precautions for user
IB2, T4, TP1
Special provisions
150
Packaging exceptions
202
Packaging non bulk
242
Packaging bulk
IATA
UN1950
UN number
Aerosol, flammable
UN proper shipping name
2.1
Class
Transport hazard class(es)
-
Subsidiary risk
Not applicable.
Packing group
No.
Environmental hazards
Read safety instructions, SDS and emergency procedures before handling.
Special precautions for user
Forbidden.
Passenger and cargo
aircraft
Other information
Forbidden.
Cargo aircraft only
IMDG
UN1950
UN number
Aerosols
UN proper shipping name
2
Class
Transport hazard class(es)
-
Subsidiary risk
Not applicable.
Packing group
No.
Marine pollutant
Environmental hazards
F-D, S-U
EmS
Read safety instructions, SDS and emergency procedures before handling.
Special precautions for user
Not established.
Transport in bulk according to
Annex II of MARPOL 73/78 and
the IBC Code
12 / 16
Material name: Liquid Wrench Silicone Spray
M914, M914/6, M914/4 Version #: 04 Revision date: 12-16-2015 Issue date: 06-01-2015
SDS US