SDS

US. NIOSH: Pocket Guide to Chemical Hazards
ValueComponents
Form
Type
Ceiling 15 mg/m3 Dust.Zinc Oxide (CAS
1314-13-2)
STEL 10 mg/m3 Fume.
TWA 5 mg/m3 Fume.
5 mg/m3 Dust.
Biological limit values
ACGIH Biological Exposure Indices
ValueComponents Determinant Specimen Sampling Time
0.3 mg/g o-Cresol, with
hydrolysis
Creatinine in
urine
*
BENZENE, METHYL- (CAS
108-88-3)
0.03 mg/l Toluene Urine
*
0.02 mg/l Toluene Blood
*
0.15 g/g Sum of
mandelic acid
and
phenylglyoxylic
acid
Creatinine in
urine
*
ETHYLBENZENE (CAS
100-41-4)
0.4 mg/l 2,5-Hexanedio
n,
without
hydrolysis
Urine
*
HEXANE (CAS 110-54-3)
* - For sampling details, please see the source document.
Exposure guidelines
US - California OELs: Skin designation
BENZENE, METHYL- (CAS 108-88-3) Can be absorbed through the skin.
BENZENE,1-METHYLETHYL- (CAS 98-82-8) Can be absorbed through the skin.
HEXANE (CAS 110-54-3) Can be absorbed through the skin.
US - Minnesota Haz Subs: Skin designation applies
BENZENE, METHYL- (CAS 108-88-3) Skin designation applies.
BENZENE,1-METHYLETHYL- (CAS 98-82-8) Skin designation applies.
US - Tennessee OELs: Skin designation
BENZENE,1-METHYLETHYL- (CAS 98-82-8) Can be absorbed through the skin.
US ACGIH Threshold Limit Values: Skin designation
HEXANE (CAS 110-54-3) Can be absorbed through the skin.
NAPHTHALENE (CAS 91-20-3) Can be absorbed through the skin.
Solvent Naphtha (petroleum), Medium Aliph. (CAS
64742-88-7)
Can be absorbed through the skin.
US NIOSH Pocket Guide to Chemical Hazards: Skin designation
BENZENE,1-METHYLETHYL- (CAS 98-82-8) Can be absorbed through the skin.
US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000)
BENZENE,1-METHYLETHYL- (CAS 98-82-8) Can be absorbed through the skin.
Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates
should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation,
or other engineering controls to maintain airborne levels below recommended exposure limits. If
exposure limits have not been established, maintain airborne levels to an acceptable level. Eye
wash facilities and emergency shower must be available when handling this product.
Appropriate engineering
controls
Individual protection measures, such as personal protective equipment
Wear safety glasses with side shields (or goggles).
Eye/face protection
Skin protection
Wear appropriate chemical resistant gloves. Suitable gloves can be recommended by the glove
supplier.
Hand protection
Wear appropriate chemical resistant clothing. Use of an impervious apron is recommended.
Other
Chemical respirator with organic vapor cartridge and full facepiece if threshold limits are exceeded.
Respiratory protection
Wear appropriate thermal protective clothing, when necessary.
Thermal hazards
When using do not smoke. Always observe good personal hygiene measures, such as washing
after handling the material and before eating, drinking, and/or smoking. Routinely wash work
clothing and protective equipment to remove contaminants.
General hygiene
considerations
6 / 15
Material name: Liquid Wrench White Lithium Grease
L616, L616/4 Version #: 03 Revision date: 02-15-2016 Issue date: 04-29-2015
SDS US