SDS

When using do not smoke. Always observe good personal hygiene measures, such as washing
after handling the material and before eating, drinking, and/or smoking. Routinely wash work
clothing and protective equipment to remove contaminants.
General hygiene
considerations
9. Physical and chemical properties
Liquid. Opaque
Appearance
Liquid.
Physical state
Aerosol.
Form
Yellow
Color
Fragrance
Odor
Odor threshold
Not available.
pH
Not available.
Melting point/freezing point
Not available.
Initial boiling point and boiling
range
347 °F (175 °C) estimated
Flash point
200.0 °F (93.3 °C) Tag Closed Cup
Evaporation rate
Not available.
Not applicable.
Flammability (solid, gas)
Upper/lower flammability or explosive limits
Flammability limit - lower
(%)
0.7 % estimated
Flammability limit - upper
(%)
8.5 % estimated
Explosive limit - lower (%)
Not available.
Explosive limit - upper (%)
Not available.
Vapor pressure
11.93 hPa estimated
Vapor density
Not available.
Relative density
Not available.
Solubility(ies)
Solubility (water)
Not available.
Partition coefficient
(n-octanol/water)
Not available.
Auto-ignition temperature
410 °F (210 °C) estimated
Decomposition temperature
Not available.
Viscosity
Not available.
Other information
Density
7.49 lbs/gal estimated
Not explosive.
Explosive properties
Flame extension
> 18 in
Flammability (flash back)
No
Flammability class
Combustible IIIB estimated
Heat of combustion (NFPA
30B)
36.35 kJ/g
Not oxidizing.
Oxidizing properties
Percent volatile
0.29 % estimated
Specific gravity
0.9 estimated
VOC (Weight %)
0 %
10. Stability and reactivity
The product is stable and non-reactive under normal conditions of use, storage and transport.
Reactivity
Material is stable under normal conditions.
Chemical stability
No dangerous reaction known under conditions of normal use.
Possibility of hazardous
reactions
4 / 8
Material name: Liquid Wrench Penetrating Oil
L106, L112 Version #: 04 Revision date: 02-08-2016 Issue date: 04-27-2015
SDS US