Technical Specifications

ManualsBrandsLIQUID NAILS ManualsAdhesiveHeavy Duty Tan Construction Adhesive - 28 oz

LN-901/LNP-901

Interior/Exterior

A premium, versatile solvent-based

adhesive that creates a super strong

waterproof and weatherproof bond

PRODUCT DESCRIPTION

LIQUID NAILS

Heavy Duty Construction Adhesive, LN-901/LNP-901,

bridges gaps, provides ten minutes working time and produces a

durable, ﬂexible, and impact-resistant bond on heavy materials.

This formula contains added antioxidants for excellent all-weather performance.

RECOMMENDED FOR

bonding common building materials (concrete, lumber, etc.) to:

NOT RECOMMENDED FOR

PRODUCT ADVANTAGES

• Plywood and waferboard

• Treated lumber

• Drywall

• Brick veneers

• Tileboard

• Exterior foamboard

(when applied below 90ºF)

• Flooring applications

• Ceramics

• Mirrors

• Granite

• Marble (real or cultured)

• Plastic

• Vinyl

• Ceiling tile

• Subﬂoors/underlayment or 1/8"

medium density ﬁberboard paneling

• Strong bond will outlast project

• Waterproof & weatherproof

• Bonds a wide range of

construction materials

• Interior & exterior

• Strong, durable and ﬂexible

• Exceptional holding power

• 10 minute working time

• Bridges gaps

Please research all installation instructions and read entire label

and Material Safety Data Sheet for safety, health & environmental

information prior to use. See other cautions on last page.

HEAVY DUTY

Construction Adhesive

Summary of content (2 pages)

PAGE 1
HEAVY DUTY Construction Adhesive LN-901/LNP-901 Interior/Exterior A premium, versatile solvent-based adhesive that creates a super strong waterproof and weatherproof bond PRODUCT DESCRIPTION LIQUID NAILS® Heavy Duty Construction Adhesive, LN-901/LNP-901, bridges gaps, provides ten minutes working time and produces a durable, flexible, and impact-resistant bond on heavy materials. This formula contains added antioxidants for excellent all-weather performance.
PAGE 2
HEAVY DUTY Construction Adhesive APPLYING THE PRODUCT Preparation: Surfaces must be clean, dry and structurally sound. 1. Cut nozzle at a 45° angle to desired size. 2. Puncture inner seal with nail or wire. Cabinets and counter tops: Apply a 1/4" bead to contact areas on the back of cabinets or counter tops. Press firmly into place. Mechanical fasteners must also be used for installing wall cabinets. Materials to furring strips or studs: Apply zigzag 1/4" bead to each strip or stud to be covered by panel.