Specification

BRAND

PRODUCT DESCRIPTION

LIQUID NAILS

All-Purpose Adhesive Caulk, AC-138, is specially formulated to bond

like a adhesive and seal like a caulk. This high performance acrylic adhesive caulk also

has silicone added for superior adhesion and ﬂ exibility. Resists dirt and dust. Stays white

and can be painted.

RECOMMENDED FOR sealing:

• Tubs • Sinks • Corner Joints • Showers

• Bathroom Fixtures • Baseboards • Wood • Vanities

• Window/door frames • Countertops • Siding & trim • Utility outlets

• Ceiling/wall joints • Vents/ducts • Moldings

AC-138 is also recommended for bonding:

• Ceramic tiles • Moldings • Vinyl cove base

• Corkboard • Metal/wood trim • Plaster/drywall

• Backsplashes • Concrete/masonry/brick • Wood

• Aluminum • Plastic • Fiberglass/glass

NOT RECOMMENDED FOR use below the water-line, automotive uses, on

aquariums, on top of silicone, wet or green wood. Excessive joint movement might be

experienced as wet or green wood dries.

Please research all installation instructions and read entire label for safety, health

& environmental information prior to use.

Look for other LIQUID NAILS products which are right for your speciﬁ c project.

PRODUCT ADVANTAGES

• Bonds and seals all surfaces • Paintable

• Paintable • Water clean-up

• Superior adhesion & ﬂ exibility • Resists dirt & dust

• Gives mildew resistant seal • Stays bright white

Read Label and Material Safety Data Sheet Prior to Use.

See other cautions on last page.

MDSF1-0292

AC-138

Indoor & Outdoor

All Purpose

Adhesive Caulk plus Silicone

High performance vinyl acrylic adhesive

caulk plus silicone that bonds and seals.

PAGE 1
All Purpose Adhesive Caulk plus Silicone BRAND AC-138 Indoor & Outdoor High performance vinyl acrylic adhesive caulk plus silicone that bonds and seals. PRODUCT DESCRIPTION LIQUID NAILS® All-Purpose Adhesive Caulk, AC-138, is specially formulated to bond like a adhesive and seal like a caulk. This high performance acrylic adhesive caulk also has silicone added for superior adhesion and flexibility. Resists dirt and dust. Stays white and can be painted.
PAGE 2
All Purpose BRAND Adhesive Caulk plus Silicone Indoor & Outdoor SURFACE PREPARATION Clean and dry surface thoroughly before applying this product. Remove any old caulk or paint. Fill any deep joints with backer rod to within 1/2" of surface. AC-138 should be applied in dry weather at temperatures above 40°F (4°C). Do not caulk outdoors with this product when rain is expected within 24 hours. LEAD PRE: Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead.