User Manual

7 | Moku:Pro Data Logger User Manual © 2023 Liquid Instruments. All rights reserved.
Data Logger control panel
Below the main Data Logger trace display is the control panel
ID
Button/icon
Description
1
Status
Logger status, either idle, aborted, waiting, or logging.
2 Share
The sharing button gives access to controls that allow you to save and
share your data. See Saving and sharing data
.
3 Memory Displays the used and remaining memory available for logging.
4
Mode
Set acquisition mode as normal or precision.
5
Filename
Configure the prefix to be used on the data filename.
6 Comment Text entered here will be saved in the file header.
7
Start/stop
Tap to start and top data logging.
8
Log format
Tap to select log format, CSV or LI binary format.
9
Duration
Tap to set log duration, up to 10,000 hours
1
.
10
Start
Tap to configure start delay, up to 240 hrs.
11
Acquisition rate
Tap to configure acquisition rate.
1
Log may not reach this duration, for example if on-board memory becomes full.