Instruction Manual

13
LCR Connection
LCR Node Address
Once the communications port and the node address of
the LectroCount register is established, enter the Lec-
troCount node address in the window below LCR Node.
Then, click on Connect below the window. This will es-
tablish communication with the LectroCount register. The
heading on the window will change from LCRView - 1 to
LCR -> N, where N is the node address of the connected
LectroCount register.
If more than one LectroCount is connected in the net-
work, click on File - New, to open a second window which
has the title LCRView - 2. Enter the node address for
this LectroCount register and press Connect to estab-
lish the link.
When a LectroCount register connection is established,
the display updates as shown on Page 15.
If the node address entered does not match any Lectro-
Count node address in the network, the following error is
displayed on the status screen.