INSTALLATION & OPERATION MANUAL SP718-V REV. A Modulated Carrier Amplifier 0-5V/0-10V Transmitter DOC#: MN-718V-A.
Sponsler, Inc. SP718-V Modulated Carrier Amplifier pg 2 DOC#: MN-718V-A SPECIFICATIONS Temperature: Operating 0 – 70oC o Storage –20 – 85 C Input Voltage: 110VAC 60Hz or 12 – 16.5VDC 50mA MAX Observe Polarity Consult factory for other Input Voltages Signal Input: Frequency 0 – 3500 Hz w/ 50KHz carrier (requires P/U Coil 1 – 1.
Sponsler, Inc. SP718-V Modulated Carrier Amplifier pg 3 DOC#: MN-718V-A BENCH TEST CALIBRATION PROCEDURE Required Equipment: Power Supply 12-16.5VDC or 110VAC Digital Multimeter (DMM) Frequency Generator Frequency Counter Oscilloscope Refer to Figure Test Procedure: NOTE: All test equipment power cords should be equipped with 2-prong ‘cheater’ plugs.
Sponsler, Inc. SP718-V Modulated Carrier Amplifier pg 4 DOC#: MN-718V-A DATE REV F/S FREQUENCY RANGE SELECT JU1 60-245 Hz JU2 220-925 Hz JU3 845-3800 Hz REVISION RECORD AUTH DR CK .90 TERMINAL LOCATION 1 2 3 4 5 6 3.00 DIA. SIGNAL IN + SIGNAL IN – ANALOG OUT + ANALOG OUT – 110 VAC NEU (DC-) 110 VAC HOT (DC+) POWER INDICATOR 5.60 ANALOG OUTPUT SELECT 3.75 DIA. 2.40 DP. NOTE: Condulet enclosure not available for 120 volts, consult factory 3/4-14 FNPT SPONSLER, INC. 1.
