Manual

87
SP4000 Flow Computer
If YES selected, define the conditions that you wish to call out on. The
possible conditions are displayed one after another.
Store option Change?
advance to next
POWER FAILURE NO(YES)
WATCHDOG TIMEOUT NO(YES)
COMMUNICATION ERROR NO(YES)
CALIBRATION ERROR NO(YES)
PRINT BUFFER FULL NO(YES)
TOTALIZER ERROR NO(YES)
WET STEAM ALARM NO(YES)
OFF FLUID TABLE NO(YES)
FLOW IN OVERRANGE NO(YES)
INPUT1 OVERRANGE NO(YES)
INPUT2 OVERRANGE NO(YES)
FLOW LOOP BROKEN NO(YES)
LOOP1 BROKEN NO(YES)
LOOP2 BROKEN NO(YES)
RTD 1 OPEN NO(YES)
RTD 1 SHORT NO(YES)
RTD 2 OPEN NO(YES)
RTD 2 SHORT NO(YES)
PULSE OUT OVERRUN NO(YES)
Iout 1 OUT OF RANGE NO(YES)
Iout 2 OUT OF RANGE NO(YES)
RELAY 1 HIGH ALARM NO(YES)
RELAY 1 LOW ALARM NO(YES)
RELAY 2 HIGH ALARM NO(YES)
RELAY 2 LOW ALARM NO(YES)
RELAY 3 HIGH ALARM NO(YES)
RELAY 3 LOW ALARM NO(YES)
TRAP ERROR NO(YES)
TRAP BLOWING NO(YES)
INPUT 3 OVERRANGE NO(YES)
INPUT 3 BROKEN NO(YES)
24VDC OUT ERROR NO(YES)
PULSE IN ERROR NO(YES)
INPUT 1 Vin ERROR NO(YES)
INPUT 1 Iin ERROR NO(YES)
INPUT 2 Iin ERROR NO(YES)
INPUT 2 RTD ERROR NO(YES)
INPUT 3 Iin ERROR NO(YES)
INPUT 3 RTD ERROR NO(YES)
PULSE OUT ERROR NO(YES)
Iout 1 ERROR NO(YES)
Iout 2 ERROR NO(YES)
RELAY 1 ERROR NO(YES)
RELAY 2 ERROR NO(YES)
RS-232 ERROR NO(YES)
A/D MALFUNCTION NO(YES)
PROGRAM ERROR NO(YES)
SETUP DATA LOST NO(YES)
TIME CLOCK LOST NO(YES)
DISPLAY MALFUNCTION NO(YES)
RAM MALFUNCTION NO(YES)
DATALOG LOST NO(YES)
Select YES or NO for Change Error Mask? prompt
Selection:
YES, NO
Display: 00:00
CALL OUT TIME
ERROR MASK
(Pager or Modem)
ENTER
COMMUNICATION
6.13
COMMUNICATION
(Continued)