Manual

21
Liquids – Mass: uses volume and temperature to yield a compensated Mass flow
rate displayed in lbm/min (kg/h) and total in lbm (kg).
Liquids – Volume: uses volume and temperature to yield a compensated Mass flow
rate displayed in GPM (1/s) and total in gallons (liters).
Heat – Gas: uses volume, pressure and temperature to yield a compensated
Mass flow rate displayed in lbm/h (kg/h) and total in lbm (kg) as
well as Heat flow rate displayed in Btu/h (kW, kcal/h, MJ/h) and
total in kBtu (kWh, Mcal, MJ).
Heat – Steam: uses volume and pressure and/or temperature to yield a
compensated Mass flow rate displayed in lbm/h (kg/h) and total in
lbm (kg) as well as Heat flow rate displayed in Btu/h (kW, kcal/h,
MJ/h) and total on kBtu (kWh, Mcal, MJ). (Unit may be set up to
follow saturated steam curve, see SPECIAL NOTE, pg. 3-9)
Heat – Liquid: uses volume and temperature to yield a compensated Mass flow
rate displayed in lbm/min (kg/h) and total in lbm (kg) as well as
Heat flow rate displayed in Btu/h (kW, kcal/h, MJ/h) and total in
kBtu (kWh, Mcal, MJ).
Del Heat – Liquids: uses volume and two temperatures to yield a compensated Mass
flow rate displayed in lbm/min (kg/h) and total in lbm (kg) as well
as Heat flow rate displayed in Btu/h (kW, kcal/h, MJ/h) and total in
kBtu (kWh, Mcal, MJ).
To access the Computation Menu:
Display Shows: Press:
Sponsler V6.13 MS197
Run?
Sponsler V6.13 MS197
Set Computations?
Flow Computations: to advance the menu
Ideal Gas – Volume?
to backup menu
to select the displayed
computation
The nine options available in the Computations Menu are:
Ideal Gas – Volume?
Ideal Gas – Mass?
Steam Tables – Mass?
Liquids – Mass?
Liquids – Volume?
Heat – Gas?
Heat – Steam?
Heat – Liquid?
Del Heat – Liquids?
A
ENT
A
B
ENT