Owner's manual

Select “4=More” by pressing “4” key. “MORE” menu will be displayed.
Select “1-Meter” by pressing “1” key.
Press “CLEAR/FEED” key: Enter serial number of turbine meter under test,
Press “ENTER” key: “MORE” menu will again be displayed.
Select “2=Plant” by pressing “2” key
Press “CLEAR/FEED” key. Enter Plant number, Press “ENTER” key.
“MORE” menu will again be displayed.
1 - Meter
2 - Plant
3 - Tractr
4 - Trailr
1 = Clock
2 = RTD
3 = Factor
4 = More
1 - Meter
2 - Plant
3 - Tractr
4 - Trailr
Meter:
1 - Meter
2 - Plant
3 - Tractr
4 - Trailr
Plant: