User guide

14
SYSDEFS (SYSTEMS DEFINITIONS)
TheSysDefs(SystemsDenitions)tabisFlightConnectEdit’suserinterfaceforviewing,creating,orediting
FlightConnectsystemsettingsandinformationsavedinFlightConnect’sSysDefsdatabaseleandappliedtothe
operationofDMSandLCR600units.
Base ID:
A user-dened ID assigned to the fueling operation.
Code:
Typically, the three or four letter airport code for the airport where
the fueling operation is located.
Name:
The name of the fueling operation.
Address 1:
The rst line of the fueling operation’s address.
Address 2:
The second line of the fueling operation’s address.
City:
The city where the fueling operation is located.
State:
The state where the fueling operation is located.
Zip:
The postal zip code where the fueling operation is located.
Phone #:
The phone number of the fueling operation.
Password:
The password for access to FlightConnect LCR 600’s
Conguration Menu or the FlightConnect DMS’ Database
Management. Blank = no password.
Load Truck #:
The load truck number assigned when moving fuel between trucks.
DMS only
Tail Letter:
Sets a default letter before the tail number. For example, if all tails
from this location begin with N, “N” can be defaulted so the fueler
does not need to enter it.
InvType:
The volume setting. DMS only
Net • Gross
Decimals:
The decimal place setting applied to the totalizers’ inventory
volumes. DMS only
Hundredths • Tenths • Whole
Additive
The text of a prompt, requiring the fueler to answer yes/no,
displayed before a fueling. Text can be entered and edited in the
text box. The text and prompt answer will be printed on the ticket.
This prompt is enabled when the Additive: box in Enable Options
is checked.
Misc1 Text - Misc2 Text - Misc3 Text
Prompt screen that can be included in the series of FlightConnect
fuelng screens. The text in these eld will appear as the title
of the screens on the LCR 600 or DMS. When these screens
appearFuelers can enter a response into a text box on the fueling
screen. The title of the prompts and the fueler’s answers will be
printed on the ticket. Prompts are enabled when the Misc1 Text :,
Misc2 Text , or Misc3 Text boxes in Enable Options is checked.
TRANSACTIONS
Format:
The le format of FlightConnect Read output.
CompTran (text le) • ASR (backward compatible LC le format - contact
factory for more information) • XML
Target:
The target location for the delivery les. This should be set to Ofce
for LCR 600 units.
Local • USB • Ofce
Transmit:
Sets the frequency/occasions when LCR 600s and DMSs will
attempt to send and retrieve data from the ofce.
ENABLE OPTIONS
TheEnableOptionsboxesactivatefeaturesandsettings
intheFlightConnectFuelingsoftwareonLCR600and
DMSunitsinthenetwork.
Additive
A yes/no prompt displayed to the fueler before fueling. The prompt
text matches the text that appears in the Additive: text box.
AType
A list box prompt of aircraft types (from the AType le). The fueler
must make a selection before fueling.
Comment
A comment printed onto fueling tickets. Comment text can be
entered and edited in the Comment: text box in the Default
Options section below.
Customer
A list box prompt of customers (from the Customer le). Fuelers
must make a selection before fueling.
Destination
A text box prompt where the fueler must enter the aircraft’s
destination code before fueling.
Flight #
A text box prompt where the fueler must enter the aircraft’s ight
number before fueling.
Fuel Cap
Prints message Fuel Cap & Door Secured: Yes
No on the fueling ticket. Fuelers can circle Yes to verify that the
fuel cap was properly replaced on the aircraft.
SETUP & OPERATION
Checked = activated : Unchecked = deactivated
SysDefs Check Boxes
Enable Options in System Denitions must also be
enabled (box checked) in the Used Fields of the
Transaction Type to be activated on the LCR 600 or DMS.
Enable Options Enabled?