User Manual

16
LOCKED
An owner/ofce security setting that limits the access
of drivers to a small number of fueling, system, and
FlightConnect elds.
To lock the LCR 600
1. Select the Security screen from the Conguration Menu.
2. Move the pointer  to User Key: eld and press the
EntEr button.
3. Enter an alphanumeric password in the text box and
press the EntEr button
4. Move the pointer  to the Security: eld and press the
EntEr button.
5. Move the pointer  to Locked in the list box and press
the EntEr button.
UNLOCKED
An owner/ofce security setting that allows drivers
access to a large number of fueling, system, and POS
elds.
To unlock the LCR 600
1. Select the Security screen from the Conguration Menu.
2. Move the pointer  to User Key: eld and press the
EntEr button.
3. Enter the same alphanumeric password that was
entered when the LCR 600 was locked. The value of the
Security: eld will change to UNLOCKED.
Throughout this manual, each LCR 600 eld denition species the security levels
that allow access to the eld. The abbreviation for each security level is as follows:
L - Locked
U - Unlocked
C - Weights & Measures Calibration
P - Stop/Pause
F - Factory
WEIGHTS & MEASURES CALIBRATION
The Weights & Measures Calibration security setting
allows access to all elds and functions necessary
for Weights & Measures approval and the complete
conguration of the LCR 600 for service.
To enter the Weights & Measures Calibration mode
1. Remove the faceplate around the red selector switch.
If the LCR 600 was Weights & Measures approved
beforehand, you will need to remove the lead seal and
wire threaded through the switchplate screws.
2. Turn the selector switch to the six o’clock position.
STOP/PAUSE
FlightConnect fueling elds can be edited during
fuelings. Turn the selector switch to the STOP (pause)
position. The fueling will pause and the fueling screen
will appear on the LCR 600. Fueling elds can be edited
in the fueling screen. After editing a eld, the fueling can
be continued by turning the selector switch back to RUN.
FACTORY
A security setting restricted to LC factory personnel.
Levels of Security
Many LCR 600 elds are accessible only while certain security levels are accessed. The security levels provide the
safeguards essential for Weights & Measures approval, and they give owners and operators a means of restricting
drivers and fuelers access to certain functions. There are ve levels of security on the LCR 600: Locked, Unlocked,
Weights & Measures Calibration, Stop/Pause, and Factory.
INTRODUCTION - SECURITY
Six O’clock Calibration Position
LCR 600 units are shipped from the factory locked.
To unlock a factory shipped LCR 600:
 User Key:
 EntEr 
 EntEr 
Factory Locked LCR 600s