Setup Owner manual

69
File Management
This screen is used to manage the les located on the
DMS i1000 Module internal ash memory or the USB ash
memory. The quantity of les displayed depends on the
number of les actually on the DMS i1000 Module internal
ash memory or USB ash memory and the ltering set
up under the command menu.
The rst line displays the driver letter and node address,
the total disk space, and the amount of free or unused
memory on the drive. The second line displays the
active directory on the left and the current le mask on
the right.
Files with a diamond are “tagged” les. Files are tagged by
moving the pointer to the le and pressing the ENTER key.
If the le isn’t tagged, the diamond appears designating
that the le is tagged. Pressing ENTER a second time
toggles the diamond off and untags the le.
File Server Commands is accessed by pressing Cmds
(F3). This opens a list box window with all available
commands.
File Server Command List
B: Copy SLF Files by Record - This command copies
all SLF format les by record. Once each record is
copied, it is deleted from the source le. File format
designation appears on page 70.
C: Copy Tagged Files - This command copies all tagged
les, but leaves the source les intact.
D: Delete Tagged Files - This command deletes all the
tagged les form the DMS i1000 Module internal
ash memory.
E: Set the Directory - This command is used to set the
directory.
I: Initialize LCPFS - This command is used to exit this
File Management screen and open Screen 2a on
page 66.
K: Set the Drive - This command is used to designate
the active disk drive. For example: C:\, D:\.
L: List All Files by Mask - This command lists all les
based on the current le mask.
M: Set the File Mask - This command sets the le mask.
The masks is a le lter. For example: if the le mask
is “*.trn”, then “L: List All Files by Mask” will show all
les (and only those les) with the extension “.trn”.
R: Rename Selected File - This command sets the active
directory. For example: C:\DMS i1000.
S: Show All Tagged Files - This command is used to
display all tagged les.
Screen 4: File Management
T: Tag All Files by Mask - This command tags all les
that match the current le mask set by “M: Set the
File Mask”.
U: Untag All Files - Untags all les.
ENTER: Tag/Untag File - The ENTER key is used to
toggle a le between tagged and untagged.
Each one of these commands can be accessed without
entering the Cmds (F3) list box. The DMS i1000 Lap Pad
has short cuts for each command. These short cuts are
accessed by holding the SHIFT key and then pressing
the letter associated with a command. For example,
pressing SHIFT and “T” will tag all les that match the
current mask. The only command that does not require
the SHIFT key is the ENTER: Tag/Untag File command.
When the pointer is next to a le, pressing ENTER will
toggle between tagging and untagging that le.
As there are more commands than lines available on the
display, use the function keys or arrow keys to access
commands lower in the list, or use the short cuts.
File Server Commands
B: Copy SLF Files by Record
C: Copy Tagged Files
D: Delete Tagged Files
E: Set the Directory
I: Initialize LCPFS
K: Set the Drive
Home PgUp PgDn End
Free: 59.1M
*.*
09/23/05 12:45
09/23/05 12:45
09/23/05 12:45
09/23/05 12:45
09/23/05 12:45
C: Size: 62.3M
DMS i1000 | •|
C500L000.LNG
CASH.SLF
COMPTRAN.TRN
CONFIG.SLF
CUSTACCT.SLF
Home PgUp Cmds PgDn End