Setup Owner manual

67
Screen 2b: Setup LCP File Server (2/2)
Setup LCP File Server
This screen allows the operator to determine whether the
LCP File Server application should boot up with Caps
Lock On or Off, and whether LCP File Server should boot
up with the system set with Insert On or Off.
Device displays the current LCP File Server device
number. This is selected from a list box of available
devices with which to communicate. If no Device numbers
are available, the screen below will display prompting the
operator to enter a New Device number.
Move the pointer to Device and press enter. If devices
were congured by the ofce computer, they will be
displayed in a list box that can contain one or multiple
options. Move the pointer to the desired Device and
press ENTER to accept. When the Device is selected,
the Name eld is populated with its name, if provided.
The Device can refer to any device with which this
DMS i1000 system can communicate. This can be the
ofce computer, another truck, or some other dened
component.
Name displays the name of current LCP File Server
device. This eld is editable. Move the pointer to Name
and press ENTER to open a eld edit window. Enter the
desired Name and press ENTER to accept. This name
is now associated with the Device.
To enter a new Device, press New (F3) to open a eld
edit window and enter a unique value between 1 and 255.
Press ENTER to accept the value. Move the pointer to
Name and press ENTER to open a eld edit window and
type in a Name for the new Device.
To delete a device from the list, simply select the desired
Device from the list box, then press Del (F4) to delete
that device from the system.
NOTE: Device and Name are elds associated with
communication through a wireless transmitter. These
elds can be ignored when using a wired connection.
Press Prev (F2) to return to Screen 2a on page 66.
Press New (F3) to add a new device number.
Press Del (F4) to delete the current selected device
number.
Press Srvr (F5) to advance to Screen 5 on page 69.
From Screen 2a on page 66, press Port (F3) to advance
to Screen 3 on page 68.
(2/2)
Off
Off
SETUP LCP FILE SERVER
Startup Caps Lock:
Startup Insert Flag:
FILE SERVER DEVICES
Use F3/New to specify the node
addresses used in the network.
Prev New Srvr
(2/2)
Off
Off
SETUP LCP FILE SERVER
Startup Caps Lock:
Startup Insert Flag:
FILE SERVER DEVICES
Device:
Name:
Prev New Del Srvr