Setup Owner manual

58
Screen 19f: Preset and Delivery (6/7)
Preset and Delivery
This screen contains information relating to the operator’s
shift. Assuming that the shift information was reset after
the last shift was completed, these values should all
initially be “0”.
NOTE: If an operator is beginning a shift and wants shift
information available at the end, then the shift totals from a
previous shift should be cleared. This is done on Screen
19g shown below.
Assuming that the shift totals were cleared, this screen
updates with shift information throughout the day.
Deliveries indicates the number of deliveries made.
Shift Net indicates the total temperature compensated
volume delivered during the shift.
Shift Gross indicates the total non-temperature
compensated volume delivered during the shift.
Press Next (F1) to advance to Screen 19g shown
below.
Screen 19g: Preset and Delivery (7/7)
This screen contains the date and time that a shift began.
It also allows the operator to reset the shift totals.
Clear Shift? is used to reset the shift totals to “0”. Move
the pointer to Clear Shift? and press ENTER to open a
list box window with the options Yes or No. Select “Yes”
to clear the shift values. Select “No” to cancel the clear
shift command.
Press Stat (F3) to advance to Screen 21 on page 60.
(6/7) 1
Units: Gallons
Gasoline
8
403.5
415.5
PRESET AND DELIVERY
Product #: 1
Product Type:
Deliveries:
Shift Net:
Shift Gross:
Next Prev Status LCR# Main
(7/7) 1
01/13/05 15:40:59
No
PRESET AND DELIVERY
Shift Start:
Clear Shift?
Prev Status LCR# Main