Setup Owner manual
52
Screen 15: Load Conguration
Load Conguration
The Load Conguration feature loads a LectroCount with
calibration data previously saved with Save Conguration
option.
Press ENTER to open a list box window which contains a
list of all previously saved congurations. Select desired
Input File and press ENTER. After the Input File has been
selected, press Load (F1) to load the conguration data to
the LectroCount. When Load is selected, the system will
prompt the operator with the a list box window that asks
if the current le should be overwritten with the selected
Input File. Select Yes or No and press ENTER.
NOTE: For this function to be implemented, the
LectroCount register must be in calibration mode.
1LOAD CONFIGURATION
Use the eld below to select
the input le that contains
the conguration data that is
to be sent to the LCR.
Input File:
Load LCR# Main