Setup Owner manual

41
Product Calibration
Screen 10d: Product Calibration (4/6)
Gross Quantity is a read-only eld. The gross quantity of
uid measured by the meter during a product calibration
prover run is represented here. This is covered in detail
in the sections on Single-Point Calibration and Multi-Point
Calibration.
Gross Preset can be used to set a prover run volume.
This represents a volume of liquid to be run through the
meter during a proving run. This is covered in detail in
the sections on Single-Point and Multi-Point Calibration.
Temperature displays current temperature reading of the
probe. This eld is not editable.
Net Quantity represents temperature compensated
quantity of current delivery. This eld is not editable.
Press Next (F1) to advance to Screen 10e on page 42.
(4/6) 1
Units: Gallons
48.8
0.0
80.5
47.1
PRODUCT CALIBRATION
Product #: 1
Gross Quantity:
Gross Preset:
Temperature:
Net Quantity:
Next Prev Cnfg Main