Setup Owner manual

Screen 9e: System Calibration (5/5)

System Calibration

These calibration information elds are for metrology use

and are not editable.

Calib Date displays date and time when the red selector

switch on the LectroCount register was last moved from

the calibration position to SHIFT PRINT position.

Calib Number displays number of times the red selector

switch of the LectroCount has been switched from the

calibration position to SHIFT PRINT position.

Calib Event displays number of times a calibration event

has occurred.

Cong Event displays number of times a conguration

event has occurred.

For more information on Calib Event and Cong Event,

refer to page 64.

Press Cnfg (F4) to return to the Screen 7 on page 28.

From there, move pointer to Product Calibration and

press ENTER to advance to Screen 10a on page 37.

(5/5) 1

01/11/05 11:50:25

SYSTEM CALIBRATION

Calib Date:

Calib Number:

Calib Event:

Cong Event:

Prev Cnfg Main