Setup Owner manual
29
General Setup
Screen 8a: General Setup (1/5)
General Setup screens are used to set up system
information, deliveries, and ticket printing.
Unit ID is an alpha-numeric identier up to 10 characters
in length used to identify the active LectroCount register.
Press ENTER to open a eld edit window and enter
desired value. Press ENTER to accept.
Presets Allowed denes presets an operator can set
while making deliveries. Preset deliveries allow an
operator the ability to enter a preset volume for delivery.
Upon reaching the preset volume, LectroCount will
typically close a security valve (if equipped) and print a
delivery ticket.
There are four options for Presets Allowed.
BOTH - for both net and gross presets
GROSS - for gross (non-compensated) presets only
NET - for net (temperature compensated) presets
or
NONE - for no presets allowed
Move pointer to desired option and press ENTER to
accept.
NOTE: If the preset feature is used, ensure the S1 CLOSE
eld on page 38 is set for a preset value to work properly.
Date Format is used to determine the format date
displayed and printed. Press ENTER to open a list box
window with the options: DD/MM/YY (Day/Month/Year)
and MM/DD/YY (Month/Day/Year). Select desired format
and press ENTER to select.
Date and Time are elds where current date and time
are entered for the LCR (not for LCRHost). Open the
eld edit window for each and enter current date and
time. Three characters used as a separator are period (.),
forward slash (/), and colon (:). Press ENTER to accept
each value.
Pressing Next (F1) advances display to Screen 8b on
page 30.
Pressing Cnfg (F4) returns display to Screen 7 on page
28.
Pressing Main (F5) returns display to Screen 2 on page
20.
(1/5) 1
Net
MM/DD/YY
01/11/05
11:27:36
GENERAL SETUP
Unit ID:
Presets Allowed:
Date Format:
Date:
Time:
Next Cnfg Main