Setup Owner manual
28
Network and LCR Device must be assigned rst.
Congure LCR is similar to Main Menu as a launching
point for several other sub-menus. Within Congure
LCR are:
General Setup
Advances display to Screen 8a on page 29.
System Calibration
Advances display to Screen 9a on page 32.
Product Calibration
Advances display to Screen 10a on page 37.
Diagnostics
Advances display to Screen 11a on page 48.
Security
Advances display to Screen 12 on page 49.
Pressing Stat (F3) advances display to Screen 21 on
page 60.
Pressing LCR# (F4) allows the operator to select the
LectroCount register to be congured.
Pressing Main (F5) returns display to Screen 2 on page
20.
Ensure pointer is on General Setup and press ENTER
to advance to Screen 8a on page 29.
Screen 7: Congure LCR
Congure LCR
1CONFIGURE LCR
General Setup
System Calibration
Product Calibration
Diagnostics
Security
Status LCR# Main