Setup Owner manual

15
Screen 2c: SYSTEM UTILITIES (3/3)
System Utilities
Upgrade DMS i1000 Software is a function that enables
operator to upgrade system software of a LectroCount
DMS i1000 Module. Press ENTER to open a list box
window with options Yes or No.
Move pointer to Yes and press ENTER. Software on
the USB ash memory will load to ash memory of DMS
i1000 Module.
Press Exit (F5) to exit System Utilities menu and advance
to Screen 3 on page 16. Screen 1 may not appear again
during normal operation.
(3/3)SYSTEM UTILITIES
Upgrade DMS i1000 Software
Prev Exit