Setup Owner manual

14
System Utilities
Screen 2b: System Utilities (2/3)
Startup Caps Lock is used to designate whether the DMS
i1000Menu should boot with caps lock on or off. Press
ENTER to open a list box window with options Off or On.
Startup Insert Flag is used to designate whether the DMS
i1000Menu should boot with the system set to insert or
overwrite. Press ENTER to open a list box window with
options Off or On.
Ofce Node Address allows operator to specify LCP node
address used by an ofce computer when communicating
with a wireless transmitter. This can be any number in the
range from 0 to 255. Leave this set to 0.
Ofce Path is used to identify a path to where transaction
and database les are located on an ofce computer
when a wireless transmitter is in use. This can be an
alpha-numeric string up to 244 characters in length. As
an example:
C:\ or
C:\DMS i1000 or
C:\DMS i1000\DATA or
C:\SOURCE\DMS i1000
Leave this eld blank.
USB Path is used to identify path to where transaction
and data base les are located on the DMS i1000 USB
ash memory. This eld can be an alpha-numeric string
up to 244 characters in length. As an example:
D:\ or
D:\DMS i1000 or
D:\DMS i1000\DATA
Press Next (F1) to advance to Screen 2c on page 15.
Press Prev (F2) to return to Screen 2a on page 13.
Press Exit (F5) to exit System Utilities menu and advance
to Screen 3 on page 16. Screen 1 may not appear again
during normal operation.
(2/3)
Off
Off
255
C:\SOURCE\DMS i1000
D:\DMS i1000
SYSTEM UTILITIES
Startup Caps Lock:
Startup Insert Flag:
Ofce Node Address:
Ofce Path:
USB Path:
Next Prev Exit