Owner's manual
If the box is
checked in the Source and Destination window, you must
assign products’ LCR-II calibrations differently.
LCLoad still creates a list of products and assigns codes
and generic descriptions, but aligning the products to the
correct LCR-II calibration is done in the Product.500 not
FuelType.500. In fact, the FuelType.500 window will be
eliminated from the button list.
The eld will be replaced with a
eld. species which LCR-II to read,
and species the correct calibration (each
LCR-II can contain four calibrations) to use.
The Product Record window has a
Calibration section to enter the correct meter and
calibration values.
To correctly align your product with the proper LCR-
II calibration, you must enter the correct meter,
(use 1 for single meter systems), and the
correct calibration setting, .
A LCR-II calibration ticket should print this information.