Owner's manual
A Product.500 record contains specications for a product.
The Product.500 records are created by LCLoad, but they
can be edited using DMS Ofce.
If your LCR-II is calibrated for more than one product, the
eld must reect the proper FuelType.500
record. The eld is often changed to the
precise name of the product.
Enter an alpha-numeric value <= 8 characters.
This is the value from DELLOAD.DAT.
Enter an alpha-numeric value <= 35 characters.
This is the Fuel Type Record with the proper LCR-II
calibration for the product. Enter any integer <= 255.
This eld can be left blank. Unit Price is pulled from
DELLOAD.DAT and saved in Dispatch.500
This eld can be left at zero. Tax Code is pulled from
DELLOAD.DAT and saved in Dispatch.500.
DMS Ofce’s Product.500 and FuelType.500 label and
congure products, so DMS Delivery can properly receive
meter readings from the LCR-II.
LCLoad creates a product record for every unique product
code found in DELLOAD.DAT’s records and enters them
into Product.500. FuelType.500 is manually populated
with DMS Ofce.
Product.500 and FuelType.500 must be set up after running
LCLoad and before launching DMS Delivery.
At start up, DMS Delivery saves all LCR-II calibrations (4
calibrations per meter) that exist in the system. In order
to correctly meter product, DMS Delivery needs to know
which LCR calibration to use. FuelType.500 denes each
calibration, and Product.500 chooses a FuelType.500
record (a calibration) for each product.
If the vehicle has a multi-meter system and the meters
share LCR-II calibrations, DMS Delivery will prompt the
driver to choose a meter.
Product.500 after LCLoad
Product.500 after LCLoad and DMS Ofce conguration
FuelType.500 after LCLoad and DMS Ofce
conguration