Owner's manual


The  button must be clicked for DMS Ofce to activate
the new le paths and checked boxes.


The Source and Destination window assigns a location
in the hard drive or network for DELLOAD.DAT and
DELREAD.DAT. The      is
the location of the ASCII text le generated by the back
ofce software for DMS Ofce (DELLOAD.DAT). The
 is the location of the
DMS Ofce generated ASCII text le for the back ofce
software (DELREAD.DAT).
To open this window,click the  button on the toolbar
or select the  command under the 
drop down window.
Either type in the le path or click the browse button.
Make sure the ASCII data le name and your source le
name match.

cHeckeD LCRead appends delivery records to an
existing DELREAD.DAT le.
uncHeckeD LCRead overwrites any existing
delivery records in the DELREAD.DAT
le.

cHeckeD Allows manual conguration of products,
LCR-II # and LCR-II calibrations.
Blocks out FuelType.500.
uncHeckeD Allows FuelType.500 conguration to
automatically nd LCR-II calibrations in
DMS Delivery.
This box should be checked when running LCRead on
multiple USB ash memory devices.
The Source and Destination window should be completed
correctly before running LCLoad.
By checking this box, DMS Ofce will congure products in
the same manner as the LC
3
. See pg. 26.

cHeckeD Reads DELLOAD.DAT tax elds for a
specialized three tax conguration.
uncHeckeD Default tax conguration.