Manual

ManualsBrandsLiquid Controls ManualsEquipmentDB Manager

Registering applications on DBManager entails mapping

the le path to the master database on the computer

and the databases on the DMS and LCR 600 units in the

network.

To register the application in DB Manager:

1. From the Setup Database Manager window, under

Registered Applications, click Add.

2. From the Add Application window, enter a name for the

application network in the Application Name: eld.

3. From the Add Application window, click the small folder

icon to the right of the Path of Master Files on Ofce

PC eld and, in the Browse for Master Files Folder

window navigate to the folder where the master database

les are saved. The le path can also be entered into the eld

manually.

4. From the Add Application window, enter the le path of

the databases on the DMS and LCR 600 units. See note

below.

Browse for Master Files Folder

Add Application

SETUP - DBMANAGER

Registering the les server nodes in the network entails

identifying the node of each DMS and LCR 600 in the

fueling system and entering them into DBManager.

To register the DMS and LCR 600 units in

DBManager:

1. Click the DBManager icon.

2. From the Database Manager window, click Setup.

3. From the Setup Database Manager window, under

Registered Filed Server Nodes, click Add.

4. In the Register New Node window, type a name for the

DMS or LCR 600 in the Node Name: eld. (ex: Truck 1)

5. If setting up a cellular network, enter the IP address of the

modem connected to the unit in the Node IP Address:

eld. If using serial communication, this eld should be set to 0.0.0.0.

6. In the Node Number: eld, enter the node of the unit .

7. Repeat steps 3-6 until each DMS and LCR 600 in the

fueling network is registered.

Value must match the LCP Node Address: in the Setup

LCP File Server (2/3) window of each DMS unit in the

network and the Unit ID: in the General Setup 1 screen

on each LCR 600 in the network.

After a node is registered, DBManager will

create a database folder for the device (node) in

C:\DMS, named by the name of the device.

File paths are set in the Ofce Path: eld in the

System Utilities (2/3) window on the DMS and the

Ofce Path: eld in FlightConnect Setup on the LCR

600. The DMS le path should be C:\DMS. The LCR

600 le path should be A:\.

Registered Nodes