Safety data sheet

Safety data sheet according to Regulation (EC) No 1907/2006, Annex II
Revised on / Version: 27.10.2014 / 0014
Replaces revision of / Version: 18.11.2013 / 0013
Valid from: 27.10.2014
PDF print date: 04.11.2014
GETRIEBEOIL-ADDITIV 20 g
Art.: 1040
Protect from direct sunlight and warming.
7.3 Specific end use(s)
No information available at present.
SECTION 8: Exposure controls/personal protection
8.1 Control parameters
Chemical Name
Oil mist, mineral
Content %:
WEL-TWA: 5 mg/m3 (ACGIH) WEL-STEL: 10 mg/m3 (ACGIH) ---
BMGV: --- Other information: ---
Chemical Name
Molybdenum disulphide
Content %:
WEL-TWA: 10 mg/m3 (molybdenum insoluble
compounds, as Mo)
WEL-STEL: 20 mg/m3 (molybdenum insoluble
compounds, as Mo)
---
BMGV: --- Other information: ---
Chemical Name
Molybdenum compounds, insoluble
Content %:
WEL-TWA: 10 mg/m3 (as Mo) WEL-STEL: 20 mg/m3 (as Mo) ---
BMGV: --- Other information: ---
WEL-TWA = Workplace Exposure Limit - Long-term exposure limit (8-hour TWA (= time weighted average) reference period) EH40. AGW =
"Arbeitsplatzgrenzwert" (workplace limit value, Germany). | WEL-STEL = Workplace Exposure Limit - Short-term exposure limit (15-minute
reference period). | BMGV = Biological monitoring guidance value EH40. BGW = "Biologischer Grenzwert" (biological limit value, Germany) |
Other information: Sen = Capable of causing occupational asthma. Sk = Can be absorbed through skin. Carc = Capable of causing cancer and/or
heritable genetic damage.
** = The exposure limit for this substance is repealed through the TRGS 900 (Germany) of January 2006 with the goal of revision.
8.2 Exposure controls
8.2.1 Appropriate engineering controls
Ensure good ventilation. This can be achieved by local suction or general air extraction.
If this is insufficient to maintain the concentration under the WEL or AGW values, suitable breathing protection should be worn.
Applies only if maximum permissible exposure values are listed here.
8.2.2 Individual protection measures, such as personal protective equipment
General hygiene measures for the handling of chemicals are applicable.
Wash hands before breaks and at end of work.
Keep away from food, drink and animal feedingstuffs.
Remove contaminated clothing and protective equipment before entering areas in which food is consumed.
Eye/face protection:
Tight fitting protective goggles (EN 166) with side protection, with danger of projections.
Skin protection - Hand protection:
Protective gloves, oil resistant (EN 374)
If applicable
Protective nitrile gloves (EN 374)
Permeation time (penetration time) in minutes:
>= 60
Minimum layer thickness in mm:
0,4
Protective hand cream recommended.
Skin protection - Other:
Protective working garments (e.g. safety shoes EN ISO 20345, long-sleeved protective working garments)
Respiratory protection:
Normally not necessary.
If OES or MEL is exceeded.
Filter A2 P2 (EN 14387), code colour brown, white
Observe wearing time limitations for respiratory protection equipment.
Page 5 of 12