Information
56
particles and liquid contaminants. They are drained
with the waste oil when the oil is changed. The oil cir-
cuit is now freed from deposits, residues and gums.
Deposits on the piston
rings before fl ushing
engine.
Compression diagram
before engine fl ushing.
After engine fl ushing
with LIQUI MOLY
Motor-Clean.
Compression diagram
after cleaning the oil
circuit with LIQUI MOLY
MotorClean.
Full compression
pressure and optimum
engine performance.
When an oil change has been prepared for in this
way, the fresh oil can display its true capabilities. It
is no longer pre-stressed by residual waste left over
from the old oil:
˜
The engine can once more work at its full
capacity.
˜ The engine runs with lower friction.
˜ The exhaust characteristics are optimised.
˜ Lack of lubrication is prevented.
Deposits and residues adhere to the piston rings.
Compression deteriorates, harmful combustion gases
enter the engine oil. Damage to the engine can result.
Application:
500 ml are suffi cient for engines with an oil content
of up to 5 l. Add to the engine oil BEFORE the oil
change. After approx. 10 minutes idling, drain old oil.
Change fi lter and pour in fresh oil. Fully compatible
with all commercially-available engine oils. Tested
with turbochargers and 3-way catalytic converters.
For all petrol and diesel vehicles.
Note:
Used oil should be taken to a waste-oil collection
point. Incorrect disposal of waste oil endangers the
environment! Do not mix with other substances such
as solvents, brake fl uid and coolants.
For the perfect
oil change.
Our practical oil change
canister is available for oil chan ging.
Please request further information.
Professional oil changers
protect their engine with
Motor Protect anti-wear ad -
ditive from LIQUI MOLY AF-
TER changing their engine
oil.