Owner manual

Rev: 03.14.2014
Page 30
5200 Axle Webpage
Contact us: Lippert Components Inc. - www.lci1.com/customerservice - Phone: [phone] - Email: [e-mail]
5,200-LB AXLE WHEEL END COMPONENTS
AXLES AND SUSPENSION
5,200-LB AXLE WHEEL END COMPONENTS
AXLES AND SUSPENSION
Callout Part # Description
A 122065 Rubber plug for lubed grease caps
B
122064 Dust cap, for 2.5" bore, super lube
122071 Dust cap, for 2.5" bore, non-lube
C 122075 Cotter pin
D 122081 Spindle nut, 6 slot
E 179660 Spindle washer, round ID
E1 172888 Spindle washer, for spindle with D-flat
E2 119216 Spindle locking tang washer
Use E1 and E2 in place of C and E if spindle has no hole for cotter pin and has D-flat on all axles built prior to 2009
F
122091 Outer bearing cone, 15123
122996 Outer bearing cup, 15245
G
122094 Brake Hub; 655; ½ " studs
122095 Brake Hub; 865; ½ " studs
122096 Brake Hub; 865; ⁄" studs
H
122066 Inner bearing cone, 25580
124287 Inner bearing cup, 25520
I 122088 Grease seal, double lip, 2.25" ID x 3.376" OD
A
B
D
F
G
H
I
C
E