Owner's manual

ManualsBrandsLippert Components ManualsHardwareShock Kit Aftermarket

Shock Kit

Aftermarket Manual

www.lippertcomponents.com (574) 537-8900 Rev: 01.15 - Shock Kit Aftermarket Manual

Table of Contents

Introduction ............................................ 2

Parts List............................................... 2

Preparation............................................. 2

Installation ............................................2-3

Notes................................................... 4

Shock Kit

Aftermarket

Manual

Summary of content (4 pages)

PAGE 1
Shock Kit Aftermarket Manual Shock Kit Aftermarket Manual Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 2
Shock Kit Aftermarket Manual Introduction Preparation Instantly improve your ride with our complete shock mount kits. Shocks help to efficiently manage axle spring movement to provide a smoother, more comfortable ride. Tools Required: • Floor Jack • Drill / Socket Wrench • Torque Wrench Parts List • 3/8” Socket B • 9/16” Socket • 11/32” Drill Bit A • Tape Measure E • Marker D 1. Check to make sure slide-out cross shafts are not in the way. G C 2.
PAGE 3
Shock Kit Aftermarket Manual 4. Compress the shock (Fig.2) and make a mark on the inner shock where the outer shock stops (Fig. 2A and 3A). 9. Align the bottom of the extended portion of the upper shock mounting bracket to the mark made on the I-beam in Step 8 and drill 11/32” pilot holes. 5. Release compression (Fig. 3). Measure the stroke (Fig. 3B) and make a mark on the inner shock that is one half of the stroke length (Fig. 3C). 10.
PAGE 4
Shock Kit Aftermarket Manual Notes Manual information may be distributed as a complete document only, unless Lippert Components provides explicit consent to distribute individual parts. All manual information is subject to change without notice. Revised editions will be available for free download at www. lippertcomponents.com. Manual information is considered factual until made obsolete by a revised version. Please recycle all obsolete materials and contact Lippert Components with concerns or questions.