R��� D��� P���� K�� OWNER'S MANUAL Rev: 07.15.
TABLE OF CONTENTS System 3 3 4 Safety Information operation Introduction Lippert Components Patio Railing Kits are designed to help make the ramp door a comfortable, additional living space. The self-storing design stays attached to ramp door at all times and provides additional entertaining space on the toy hauler ramp door. The easy to follow instructions in this manual will describe the process of setting up the ramp door Patio Railing Kit. operation 1. Lower Ramp Door to level position.
. Firmly grasp both the top and bottom of the patio frames (Fig. 3). Fig. 3 4. The gate moves vertically. While SUPPORTING frame, pull towards yourself, lifting before it is rotated into either the setup or tear down position (Fig. 4). Note: DO NOT scrape the boot and frame leg on the ramp door. Doing so may damage the coating on the floor and the frame. Fig. 4 Rev: 07.15.
5. Replace top hanger pins (4) to secure the railing. Swing the patio kit doors away from the rest of the frame and link together in the middle (Fig. 5). Fig. 5 6. Be sure to slide legs into guide plate (Fig. 6). 7. Apply thumb screws to secure the gate in a locked position (Fig. 7). Fig. 6 Rev: 07.15.2014 Fig.
Fig. 8 Fig. 9 Rev: 07.15.
All information contained within may be distributed as a full document only, unless otherwise permitted by explicit consent of Lippert Components Inc. to distribute individual parts. All information contained within is subject to change without notice. New editions will be posted on www.lci1. com and can be downloaded for free. Information contained within is considered factual until made obsolete by a *NEW* revision. Please recycle all obsolete materials.
