Users Manual Part 1
•
A U
ppert
Componenui
Com
pany ®
Fig
.2
•
Es
cessary, use wire strippers to expose enough
ba e wire to make a good electrical connection within the
but connector.
B. Cut a 1 ½" long strip
of
heat shrink tubing. Slip tubing
onto electrical wire.
C. Insert the docking wire into one open end
of
the butt
connector, then crimp butt connector in-place using a
crimping tool.
AquaFr
Installation and Owner's Manual
(For Aftermarket Applications)
~<v
D.
Insert 12V
DC
electrical syste~
ir
info the
remaining open end
of
the butt . , e tor. Crimp butt
connector in-place.
E.
Slide heat shrink tubin , o r connection. Apply
heat gun
to
the tubing
_)
s al ne connection.
F.
If
using heat shrink
ie
r mp utt connectors, additional
heat shrink tubi is not ·equired. Do
as
follows:
Fig
.4
Activation
A data package is required to activate the AquaFi wireless
Internet system. Go
to
taylormadeproducts.com/aguafi for
data plan activation. Have the IMEI (International Mobile
Equipment Identity) number, Make and Model of the
watercraft and a credit card available.
lc11.com
574-537-8900
3
CCD-0002558
Rev 05.23.19