Owner's Manual

7
taylormadeproducts.com/wavemaker 574-537-8900 Rev:06.11.20
Taylor Made
®
Wavemaker Stereo
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0003867
Operation - Android & iOS
The Wavemaker system is operated by an app available at
the Google PlayStore and iTunes.
1. Download and install the app on an Android or iOS device.
2. Apply power to the amplier.
3. Go to the Wi-Fi settings.
4. Connect to the TM_FX_DSP network
5. Open the app and establish sync to DSP (Fig.13).
Fig.13
6. EQ1 is the OEM Factory default setting that was tuned
during production, if the system came from an OEM (Fig. 13A).
7. EQ2 through 8 are at and can be adjusted. Select one
of the EQ buttons to make changes (Fig.13B).
8. Select the correct audio source, either Line-in or
Digital BT (Fig.13C).
9. Press the Advanced Function button to access the DSP
settings (Fig.13D).
10. If the DSP does not automatically connect, press the DSP
Sync button (Fig. 13E).
11. Press the Info button to display software versions of DSP
and App (Fig. 13F).
12. To use the Master/Main Volume control (Fig. 14), move the
white ball around the circle or use the (+) plus or (-) minus
controls to set the master volume level.
NOTE: It is important to match is volume to the audio source
to prevent distortion.
A
B
C
D
E
F
Fig.14
See the next page for additional adjustment screens.