Owner's Manual

3
taylormadeproducts.com/wavemaker 574-537-8900 Rev:06.11.20
Taylor Made
®
Wavemaker Stereo
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0003867
Installation
1. Select a location to mount the Wavemaker amplier. It
should be mounted to a at, solid location that is in close
proximity to the power source.
NOTE: Do not mount near heat sources and make sure
there is sufficient air flow around the unit.
2. Mount the amplier using supplied screws (Fig.1).
Pre-drilling holes is recommended.
Fig.1
3. Connect the speaker wires from installed Exciters to the
amplier (Fig.2) according to the wiring diagrams on the
next two pages.
NOTE: See Exciter Speaker Aftermarket Document CCD-
0003867 for Exciter installation instructions.
Inside View
Outside View
Fig.2