Waste Master® OEM INSTALLATION MANUAL Rev: 09.04.
TABLE OF CONTENTS Introduction Installation of System Prior To Storage Box Installation Storage Box Installation 2 3 4 4 Introduction Unlike traditional hose coils that trap debris, the tough Waste Master® hose is designed with its helical coil on the outside, while the inside is much smoother, preventing waste from getting trapped inside the hose. The UV-protected hose features "stay put" technology that keeps it extended during use to the exact length required.
Installation of System 1. 2. 3. 4. The female cam lock (Fig. 2) affixes to the holding tank outlet pipe. The male cam lock fitting comes pre-installed on the end of the 4:1 compression hose (Fig. 3). The end of the holding tank outlet pipe on the coach MUST be directed at and be within 3" of the hole in the side of the storage box (Fig. 4). Apply the ABS glue to the pipe at the coach. Apply ABS glue to the female cam lock fitting and apply another swipe of glue to the pipe at the coach.
Prior To Storage Box Installation The storage box will be used for permanent hose connection to the RV holding tank outlet pipe: • Choose a location in close enough proximity to the holding tank outlet pipe for permanent connection. • The box should be within 3" of the female cam lock on the holding tank outlet pipe. • Prior to installation, drill a 4” hole in the side of the box in one of two locations (Fig. 5A or 5B).
7. 8. Insert the Waste Master® hose end, which has the 3” male cam lock fitting (Fig. 3), into the previously installed storage box through the opening at the end of the box. From the inside of the box, push the male cam lock fitting out through the 4” hole in the side. With the cam lock arms in the open position (Fig. 8) insert the male cam lock fitting into the female cam lock (Fig. 9). Lock the hose in place by pushing the arms down against the side of the female cam lock.
The contents of this manual are proprietary and copyright protected by Lippert Components, Inc. (“LCI”). LCI prohibits the copying or dissemination of portions of this manual unless prior written consent from an authorized LCI representative has been provided. Any unauthorized use shall void any applicable warranty. The information contained in this manual is subject to change without notice and at the sole discretion of LCI. Revised editions are available for free download from www.lci1.com.
