User Manual
‑ 8 ‑EN
5. microSD card port
6. Microphone
How to start the camera and run the applicaon
Find and download Lionelo Smart applicaon from iOS Store/Google
Play store, or scan QR code at the beginning of the operang manual.
Note: Only Wi-Fi 2.4 GHz networks are supported. 5 GHz networks
are not supported.
1.
Sign up in the applicaon through your e-mail address. Accept
the terms of use.
2.
Select the user name and password, and then click „Conrm”.
Enter the code you have received in your mailbox.
3. While conguring, set the camera as close to the Wi-Fi router as
possible to boost the pairing procedure (g. 6).
Note: the camera can be added only to one account in the applicaon.
To add the camera to other account, it must be deleted from the
previous account.
1. Supply power to the camera through a USB cable.
2. Select „Add new device”.
3.
Reset the camera by pressing and holding the reset key for 5
seconds (3, g. B).
4.
Select Wi-Fi network which you wish to connect to and enter
the password.
5. You will see QR code in the applicaon. Place the mobile phone
at a distance of about 20 cm from the camera (g. 7). Wait for
the camera to give a sound. Conguraon should be completed
within about 30 seconds.
Light indicator
1. The light glows in red – no connecon.