User's Manual Part 2

ManualsBrandsLionda Technology ManualsElectronics2.4 GHz 77-Channel DTS Cordless Phone

Multi-HANDSET, Multi-BASE UNIT System

The system supports the registration of 9 HANDSETS into the BASE UNIT. The user at his

option can add another BASE UNIT (B2) and register the same HANDSETS. The HANDSETS

can make an INTERCOM CALL, CALL TRANSFER to one another provided they are linked to

the same BASE UNIT at a time.

Intercom Call

1. With the HANDSET in STANDBY mode, press the

button . The LCD Screen of the initiating

HANDSET will display “Select H/S:.”

2. Enter the ID # of the receiving HANDSET by

pressing the TELEPHONE KEYPAD to

buttons (self exclusive).

3. The receiving HANDSET will receive a page tone

and the LCD Screen will display “Handset # X,

Paging you.”

4. The receiving HANDSET will connect by pressing

the button. Both LCD Screen will display

“Intercom With:, Handset # X.”

5. To end the INTERCOM CALL, press the

again. The LCD Screen of both HANDSET will

return to Standby mode.

Receiving a Call while in Intercom Call

1. When a call arrives, both HANDSET of the already

connected Intercom call will emit two short double

“beep” sound. The Caller ID information, if available,

will display on the LCD Screen after the alert beep.

2. Press the button to terminate the

Intercom call.

3. Press the button to access the call.

1 9

DEL/INT

Initiating HANDSET

Receiving HANDSET

Both

HANDSET

DEL/INT

TALK

Multi-HANDSET, Multi-BASE UNIT System Operation

K. Registering the HANDSET

1. Press the /MENU button to enter the menu.

2. Press the button to go to the REGISTER programming option.

3. Press the button. The LCD Screen will

prompt “Select base.” The default setting is “BASE 1

(B1)”.

4. To confirm, press the button again. The

LCD Screen will display “Put down H/S”. Put the

HANDSET on the BASE UNIT charge cradle within

6 seconds. A confirmation “beep” tone will be heard.

5. The BASE UNIT will automatically assign the ID

number of the newly registered HANDSET. The

HANDSET ID # will be displayed on the LCD Screen.

6. To register more HANDSETS, follow steps 1 to 4.

7. Continue with programming or press the /MENU

button to return to STANDBY mode.

NOTE:

To register the HANDSET/S to another BASE UNIT. Select the BASE 2 option by pressing

the SCROLL UP or DOWN button. The second BASE UNIT (B2) must be

connected to a separate telephone line.

L. Setting the ALARM CLOCK

1. Press the /MENU button to enter the menu.

2. Press the button to go to the ALARM CLOCK programming option.

3. Press the button. Set the time by pressing the TELEPHONE KEYPAD

to buttons. Press the button to enter AM, or button to enter PM. The

default ALARM CLOCK setting is “Off.”

4. When the desired setting is displayed, press and hold the /RE/PA button to save

the setting. A long “beep” will sound to confirm the setting has been saved.

5. Press the /MENU button to return to STANDBY mode.

NOTE:

To stop the alarm, press any TELEPHONE KEYPAD button. The ALARM setting is one short

setting and once activated it has to be re-set for the next alarm.

EDIT/FLASH

VOL

EDIT/FLASH

VOL

EDIT/FLASH 1

0 1

VOL

SAVE

Caller ID System Operation

DSST~2801~B.qxd 1/25/2003 7:03 PM Page 18