User's Manual Part 2
I. Deleting Message Waiting Indication
1. Press the /MENU button to enter the menu.
2. Press the button to go to the MESSAGE WAITING programming option.
3. Press the button to reset the Message Waiting Indication. “Off” will begin
flashing.
4. Press and hold the /RE/PA button to delete the indication. A long “beep” will
sound to confirm the setting has been saved.
6. Continue with programming or press the /MENU button to return to STANDBY
mode.
J. Setting the Area Code
1. Press the /MENU button to enter the menu.
2. Press the button to go to the AREA CODE programming option.
3. Press the button. The entry will display a flashing prompt at the right side of
the number field.
4. Press the TELEPHONE KEYPAD to buttons to enter the three digit area
code for your phone number.
5. When the desired setting is displayed, press and hold the /RE/PA button to save
the setting. A long “beep” will sound to confirm the setting has been saved.
6. Continue with programming or press the /MENU button to return to STANDBY
mode.
NOTE:
To use the call back function, press the /OPTION button and then select the 10-DIGIT
DIALING mode. Press the button and the unit will automatically dial the stored
7-digit number plus the area code.
The LCD Screen will only display the last 7-DIGITS for all 10-DIGIT INCOMING CALLS that
matched the AREA CODE setting.
EDIT/FLASH
SAVE
9
VOL
VOL
VOL
0
EDIT/FLASH
1
0
VOL
SAVE
#
TALK
26
Caller ID System Operation
25
5. When the desired setting is displayed, press and hold the /RE/PA button to
save the setting. A long “beep” will sound to confirm the setting has been saved.
6. Continue with programming or press the /MENU button to return to STANDBY
mode.
G. Changing the Language
1. Press the /MENU button to enter the menu.
2. Press the button to go to the LANGUAGE programming option.
3. Press the button to change the setting. “English” will begin flashing.
4. Press the SCROLL UP or DOWN button to toggle between ENGLISH,
ESPANOL, and FRANCAIS.
5. When the desired setting is displayed, press and hold the /RE/PA button to
save the setting. A long “beep” will sound to confirm the setting has been saved.
6. Continue with programming or press the /MENU button to return to STANDBY
mode.
H. Changing the User Name
1. Press the /MENU button to enter the menu.
2. Press the button to go to the USER NAME programming option.
3. Press the button to change. The entry will display a flashing prompt over the
the first character of the present USER NAME.
4. Enter the desired USER NAME using the TELEPHONE KEYPAD ( /ABC to
/WXY) buttons. The USER NAME can contain a maximum of 12 characters. See
page 17 for details.
5. Press and hold the /RE/PA button to save the setting. A long “beep” will sound
to confirm the setting has been saved.
6. Continue with programming or press the /MENU button to return to STANDBY
mode.
NOTE: The USER NAME will be displayed on the HANDSET LCD Screen during
STANDBY mode.
SAVE
VOL
VOL
7
VOL
SAVE
EDIT/FLASH
EDIT/FLASH
VOL
8
0
9
SAVE
VOL
Caller ID System Operation
DSST~2801~B.qxd 1/25/2003 7:03 PM Page 16