User's Manual Part 2

ManualsBrandsLionda Technology ManualsElectronics2.4 GHz 77-Channel DTS Cordless Phone

5. Press the TELEPHONE KEYPAD to button to enter the minute. “AM” or

“PM” will begin flashing.

6. Press the TELEPHONE KEYPAD button to choose AM or press the button

to choose PM. The month will begin flashing.

7. Press the TELEPHONE KEYPAD to button to enter the month. The date

will begin flashing.

8. Press the TELEPHONE KEYPAD to button to enter the date.

9. When the desired setting is displayed, press and hold the /RE/PA button to save

the setting. A long “beep” will sound to confirm the setting and you are returned to the

options menu.

10. Continue with programming or press the /MENU button to return to STANDBY

mode.

E. Adjusting the Contrast

1. Press the /MENU button to enter the menu.

2. Press the button to go to the CONTRAST programming option.

3. Press the button to change the setting. “4” will begin flashing.

4. Press the SCROLL UP or DOWN button to toggle from 1 to 8 levels of

contrast.

5. When the desired setting is displayed, press and hold the /RE/PA button to

save the setting. A long “beep” will sound to confirm the setting has been saved.

6. Continue with programming or press the /MENU button to return to STANDBY

mode.

F. Setting the PBX Number

1. Press the /MENU button to enter the menu.

2. Press the button to go to the PBX NUMBER programming option.

3. Press the button to change the setting. “OFF” will begin flashing.

4. Press the SCROLL UP or DOWN button to customize the digit to match your

PBX system. When not connected to a PBX, the phone will only function normally when

set to “OFF.”

SAVE

EDIT/FLASH

1 0

VOL

Caller ID System Operation

B. Setting the Ringer Melody

1. Press the /MENU button to enter the menu.

2. Press the button to go to the RINGER MELODY programming option.

3. Press the button to change the setting. “2” will begin flashing.

4. Press the SCROLL UP or DOWN button to select 1 of the 10 RINGER

MELODIES available. A ringer sample will be heard for 2 seconds when toggling from

one RINGER MELODY to another. The preset RINGER MELODY is “2.”

5. When the desired setting is displayed, press and hold the /RE/PA button to save

the setting.

6. Continue with programming or press the /MENU button to return to STANDBY

mode.

C. Turning the FIRST RING ON or OFF

1. Press the /MENU button to enter the menu.

2. Press the button to go to the FIRST RING programming option.

3. Press the button to change the setting. “ON” will begin flashing.

4. Press the SCROLL UP or DOWN button to toggle between ON or OFF.

5. When the desired setting is displayed, press and hold the /RE/PA button to

save the setting. A long “beep” will sound to confirm the setting has been saved.

6. Continue with programming or press the /MENU button to return to STANDBY

mode.

D. Setting the Time and Date

1. Press the /MENU button to enter the menu.

2. Press the button to go to the TIME set programming option.

3. Press the button to change the setting. The hour will begin flashing.

4. Press the TELEPHONE KEYPAD to button to enter the hour. The minute

will begin flashing.

EDIT/FLASH

SAVE

VOL

EDIT/FLASH

SAVE

VOL

EDIT/FLASH

1 0

Caller ID System Operation

DSST~2801~B.qxd 1/25/2003 7:03 PM Page 14