DSST~2801~A.qxd 1/25/2003 6:45 PM Page 1 Multi-HANDSET, Multi-BASE UNIT 2.4GHz Digital Spread Spectrum Technology CORDLESS ALL DIGITAL ANSWERING SYSTEM WITH CALLER ID/CALL WAITING 77 CHANNEL AUTOHOP Model XG2801 OWNER’S MANUAL INSTALLATION AND OPERATING INSTRUCTIONS PLEASE READ THIS MANUAL CAREFULLY BEFORE USE. KEEP FOR YOUR REFERENCE. For installation information, please see “Getting Started” instructions on page 6 or your separate Quick Start guide. Visit Us on the Web: www.uselectronics.
DSST~2801~A.qxd 1/25/2003 6:45 PM Page 2 Special Features Special Features C CALLER ID SYSTEM ongratulations on your selection of a quality XACT Product. With proper care and adherence to the set-up and user instructions in this Owner's Manual, this unit will provide you with years of trouble-free service. XACT is committed to providing quality products that fit your needs. We would like to have any comments or suggestions you might have on this product. You may mail your comments to: U.S.
DSST~2801~A.qxd 1/25/2003 6:45 PM Page 4 Special Features HANDSET Controls ANSWERING SYSTEM FEATURES Fully Digital Answering System - Provides a full range of answering functions without using cassette tapes. Digital Memory - Allows recording of memos and messages. 9. HANDSET ANTENNA Two-Digit LED Message Display - Indicates the number of messages, indicates the status of the system. Ring-Detection Selectable - Choose the number of times the telephone rings before the system answers.
DSST~2801~A.qxd 1/25/2003 6:46 PM Page 6 HANDSET Controls 4. /MENU Button: (VOLUME) During TALK mode, press to adjust the receiver volume to a comfortable listening level. (MENU) Press to access the special functions operation in STANDBY mode. (For special functions see pages 21~27.) BASE UNIT Controls VOL 5. HEADSET JACK: For connecting your headset plug to enjoy hands-free communication. (See page 12 for detail.) 6.
DSST~2801~A.qxd 1/25/2003 6:46 PM Page 8 BASE UNIT Controls BASE UNIT Controls 1. MEMO Button: Press and hold down to record memo messages. 18. MAIL 1 (MAILBOX 2) Button: Press to activate functions for MAILBOX 2. 2. TIME Button: Press to set/check the day and time. 19. MAIL 3 (MAILBOX 3) Button: Press to activate functions for MAILBOX 3. 3. OGM (OUTGOING MESSAGE) Button: Press and hold down to record OGM messages. 20. MAIL 4 (MAILBOX 4) Button: Press to activate functions for MAILBOX 4.
DSST~2801~A.qxd 1/25/2003 6:46 PM Page 10 Contents Contents Safety Instructions .......................................................................................................... 4 Forwarded Calls.................................................................................................... 20 Getting Started.................................................................................................................6 Long Distance Calls.................................................
DSST~2801~A.qxd 1/25/2003 6:46 PM Page 12 Contents Safety Instructions When the Memory is Full..........................................................................................35 IMPORTANT SAFETY INSTRUCTIONS Two-Way Recording..................................................................................................35 To reduce the risk of fire, electric shock and/or injury, always follow these basic safety precautions when using your cordless telephone equipment. 1.
DSST~2801~A.qxd 1/25/2003 6:46 PM Page 14 Safety Instructions 16. 17. 18. 19. Getting Started E. If the telephone has been dropped or the case has been damaged. F. If the telephone exhibits a distinct change in performance. Never install telephone wiring during a lightning storm. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
DSST~2801~A.qxd 1/25/2003 6:46 PM Page 16 Getting Started Getting Started 120V WALL OUTLET TELEPHONE JACK R AC ADAPTOR TELEPHONE LINE CONNECTION JACK POWER-IN CONNECTION JACK TONE/PULSE ICM ANNC SELECT ON OFF MSSGALERT ON OFF RINGER Press the TALK button to confirm that you have a dial tone. If you do not get a dial tone, review steps 3 through 11. If you still do not have a dial tone, refer to the Problem Solving section on pages 41~42.
DSST~2801~A.qxd 1/25/2003 6:46 PM Page 18 Desk Mounting Cordless Telephone Operation Preparing for Use Desk Mounting For normal position, place the BASE UNIT on any desired but suitable location. Before you can use your cordless telephone, you must charge the HANDSET for 12 hours. Failure to do so will require recharging of the BATTERY PACK more often. 1. Place the HANDSET on the BASE UNIT for 12 hours. 2. After 12 hours, remove the HANDSET from the BASE UNIT.
DSST~2801~B.qxd 1/25/2003 7:03 PM Page 2 Cordless Telephone Operation Cordless Telephone Operation Placing Calls Extension In Use Indicator 1. Press the TALK button. “Talk” will display and the Call Timer starts to count. This telephone can detect when a HANDSET is already in use. The LCD Screen of all of the HANDSETS linked to the same BASE UNIT will display “Ext in-use.” This means you will have to wait until the line is free to make a call. 2.
DSST~2801~B.qxd 1/25/2003 7:03 PM Page 4 Caller ID System Operation Caller ID System Operation Caller ID System Caller ID with Call Waiting This telephone automatically displays an incoming caller’s name and telephone number together with the date and time of the call. It records up to 50 calls and stores the data in Memory.
DSST~2801~B.qxd 1/25/2003 7:03 PM Page 6 Caller ID System Operation Caller ID System Operation Storing Caller ID Records into the DIRECTORY (PHONE BOOK) 1. When viewing the Caller ID List, press the SCROLL UP or DOWN find the record you wish to store into the DIRECTORY (PHONE BOOK). Viewing the Caller List 1. With the HANDSET in STANDBY mode, press the SCROLL UP or DOWN button. The LCD Screen will display “Incoming call,” press the SCROLL UP or DOWN button again to display the Caller ID records. 2.
DSST~2801~B.qxd 1/25/2003 7:03 PM Page 8 Caller ID System Operation Name and Telephone Number DIRECTORY (PHONE BOOK) This DIRECTORY (PHONE BOOK) lets you scroll through the list to find the person you need for one touch dialing. You can store up to 40 names and telephone numbers in the Memory. Viewing the DIRECTORY (PHONE BOOK) DIR/ 1. Press the ESC button. The LCD Screen will display “Phone book.” 2.
DSST~2801~B.qxd 1/25/2003 7:03 PM Page 10 Caller ID System Operation Caller ID System Operation Placing Calls from the DIRECTORY (PHONE BOOK) ESC 1. Press the DIR/ button. The LCD Screen will display “Phone book.” Deleting a Stored Record in the DIRECTORY (PHONE BOOK) 1. Press the DIR/ ESC button. The LCD Screen will display “Phone book.” 2. Press the SCROLL UP 2. Press the SCROLL UP or DOWN button to find the record you want to call.
