User's Manual

29
Multi-Handset, Multi-Base Unit System
The system supports the registration of 9 Handsets to a Base Unit. The user can add another
Base Unit (B2) and register the same Handsets. The Base Units must be connected to separate
telephone lines. The Handsets can make Intercom Calls, and Call Transfers to one another
provided they are using the same Base Unit at that time.
Intercom Call
1. With the Handset in standby mode, press the /INT
button . The LCD Screen of the initiating Handset will
display “Select H/S:.”
2. Enter the ID # of the receiving Handset by pressing the
keypad to buttons.
3. The receiving Handset will receive a page tone and the
LCD Screen will display “Handset #, Paging you.”
4. The receiving Handset will connect by pressing the
/INT button. Both LCD Screens will display “Intercom
with:, Handset #.”
5. To end the Intercom Call, press the /INT button again.
The LCD Screen of both Handsets will return to standby
mode.
Receiving a Call while in Intercom Call
1. When an outside call is received,
both Handset involved in the
Intercom call will emit two short
double “beep” sounds. The Caller
ID information, if available, will
display on the LCD Screens after
the alert beeps.
2. Press the /INT button to
terminate the Intercom call.
3. Press the button to access
the outside call.
1
TALK
DEL
DEL
DEL
DEL
WXYZ
9
Multi-Handset, Multi-Base Unit Operation
Man PM3375.qxd 2/25/2004 11:26 AM Page 30