User's Manual

4. Press the Scroll Up or Down button to toggle between On and Off.

5. When the desired setting is displayed, press and hold the /RE/PA button to save the

setting. A long “beep” will sound to confirm the setting has been saved.

6. Continue with programming or press the /MENU button to return to standby mode.

D. Setting the Time and Date

1. Press the /MENU button to enter the menu.

2. Press the button to go to the Time Set programming option.

3. Press the /FLASH button to change the setting. The hour will begin flashing.

4. Press the keypad to button to enter the hour. The minute will begin flashing.

5. Press the keypad to button to enter the minutes. “AM” will begin flashing.

6. Press the keypad button to choose “AM” or press the button to choose “PM.” The

month will begin flashing.

7. Press the keypad to button to enter the month. The date will begin flashing.

8. Press the keypad to button to enter the date.

9. When the desired setting is displayed, press and hold the /RE/PA button to save the

setting. A long “beep” will sound to confirm the setting has been saved.

10. Continue with programming or press the /MENU button to return to standby mode.

E. Adjusting the Contrast

1. Press the /MENU button to enter the menu.

2. Press the button to go to the Contrast programming option.

3. Press the /FLASH button to change the setting. “3” will begin flashing.

4. Press the Scroll Up or Down button to toggle from level 1 to level 8 of contrast.

5. When the desired setting is displayed, press and hold the /RE/PA button to save the

setting. A long “beep” will sound to confirm the setting has been saved.

6. Continue with programming or press the /MENU button to return to standby mode.

SAVE

VOL

GHI

EDIT

OPER

ABC

OPER

SAVE

VOL

SAVE

VOL

JKL

EDIT

Handset Settings

Man PM3375.qxd 2/25/2004 11:26 AM Page 18