User's Manual

NOTE: At any time during options programming you can quit and the settings that you have

changed will be saved. Press the /MENU button to quit the options menu or let the

options programming time out by not pressing any buttons for 20 seconds.

Handset Settings

VOL

A. Setting the Ringer Level

1. Press the /MENU button to enter the menu.

2. Press the button to go to the Ringer Level programming option.

3. Press the /FLASH button to change the setting. “High” will begin flashing.

4. Press the Scroll Up or Down button to toggle between High, Low, and Off.

5. When the desired setting is displayed, press and hold the /RE/PA button to save the

setting. A long “beep” will sound to confirm the setting has been saved.

6. Continue with programming or press the /MENU button to return to standby mode.

B. Setting the Ring Melody

1. Press the /MENU button to enter the menu.

2. Press the button to go to the Ring Melody programming option.

3. Press the /FLASH button to change the setting. “2” will begin flashing.

4. Press the Scroll Up or Down button to select 1 of the 10 Ring Melodies available. A

ringer sample will be heard for 2 seconds when toggling from one Ring Melody to another. The

preset Ring Melody is “2.”

5. When the desired setting is displayed, press and hold the /RE/PA button to save the

setting. A long “beep” will sound to confirm the setting has been saved.

6. Continue with programming or press the /MENU button to return to standby mode.

C. Turning the First Ring On or Off

1. Press the /MENU button to enter the menu

2. Press the button to go to the First Ring programming option.

3. Press the /FLASH button to change the setting. “On” will begin flashing.

VOL

EDIT

SAVE

VOL

ABC

VOL

EDIT

SAVE

VOL

EDIT

VOL

DEF

Man PM3375.qxd 2/25/2004 11:26 AM Page 17