User's Manual

Handset Settings

K. Registering the Handset(s)

1. Press the /MENU button to enter the menu.

2. Press the button to go to the Register programming option.

3. Press the /FLASH button. The LCD Screen will prompt

“Select base.” The default setting is “Base 1.”

4. To confirm, press the /FLASH button again. The LCD

Screen will display “Put down H/S”. Put the Handset on the

Base Unit charge cradle within 6 seconds. A confirmation

“beep” tone will be heard.

5. The Base Unit will automatically assign the ID number of the

newly registered Handset. The Handset ID # will be displayed

on the LCD Screen.

6. To register more Handsets, follow steps 1 to 4.

7. Continue with programming or press the /MENU button

to return to standby mode.

NOTE: To register the Handset(s) to another Base Unit, select the Base 2 option by pressing

the Scroll Up or Down button. The second Base Unit (B2) must be connected to a

separate telephone line.

L. Setting the ALARM CLOCK

1. Press the /MENU button to enter the menu.

2. Press the button to go to the Alarm Clock programming option.

3. Press the /FLASH button. Set the time by pressing the keypad to buttons.

Press the button to enter AM, or button to enter PM. The default Alarm Clock

setting is “Off.”

4. When the desired setting is displayed, press and hold the /RE/PA button to save the

setting. A long “beep” will sound to confirm the setting has been saved.

5. Press the /MENU button to return to standby mode.

NOTE: To stop the alarm, press any keypad button. The Alarm setting is a one time setting,

therefore the alarm must be re-set before the alarm will sound again.

TONE

OPTION

EDIT

VOL

EDIT

OPER

ABC

SAVE

VOL

Man PM3320.qxd 2/25/2004 11:20 AM Page 20