User's Manual

Handset Settings

5. Press and hold the /RE/PA button to save the setting. A long “beep” will sound to confirm

the setting has been saved.

6. Continue with programming or press the /MENU button to return to standby mode.

NOTE: The User Name will be displayed on the Handset LCD Screen during standby mode.

I. Deleting Message Waiting Indication

1. Press the /MENU button to enter the menu.

2. Press the button to go to the Message Waiting programming option.

3. Press the /FLASH button to reset the Message Waiting Indication. “Off” will begin flashing.

4. Press and hold the /RE/PA button to delete the indication. A long “beep” will sound to

confirm the setting has been saved.

5. Continue with programming or press the /MENU button to return to standby mode.

J. Setting the Area Code

1. Press the /MENU button to enter the menu.

2. Press the button to go to the Area Code programming option.

3. Press the /FLASH button. The entry will display a flashing prompt at the left side of the

number field.

4. Press the keypad to buttons to enter the three digit area code for your phone

number.

5. When the desired setting is displayed, press and hold the /RE/PA button to save the

setting. A long “beep” will sound to confirm the setting has been saved.

6. Continue with programming or press the /MENU button to return to standby mode.

NOTE: To use the call back function, press the button and then select the 10-digit

dialing mode. Press the button and the unit will automatically dial the stored

7-digit number plus the area code. The LCD Screen will only display the last

7-digits for all 10-digit Incoming calls that matched the Area Code setting.

WXYZ

OPER

SAVE

VOL

EDIT

SAVE

VOL

EDIT

SAVE

VOL

OPER

OPTION

TALK

Man PM3320.qxd 2/25/2004 11:20 AM Page 19